Uconnect MBUS Master (U2601)
M- Bus Level Converter is dedicated to convert M-Bus signal to RS232/ RS485/TCP- IP and vice versa. Up to 250 M-Bus devices can be connected to M-Bus Level Converter.
Order Code
- U2601 – S125
- U2601 – S250
- U2601T – TCP
- U2301 MB
- MAX number of M- Bus devices: 250
- RS485 transmission direction : automatic
- M-Bus short connection Protection: yes
- Power supply 90- 250 V~,50 -60Hz
- Mounting type : on DIN rail
Uconnect Protocol Convertors (U240x)
Order Code:
- U2401-1 [ Modbus to Bacnet IP – 1 serial port –upto 32 Modbus Devices ]
- U2401-2 [ Modbus to Bacnet IP – 2 serial port –upto 64 Modbus Devices ]
Order Code:
- U2402 –S125 [ MBus Master to BACnet IP Support 125 slaves ]
- U2402 –S250 [ MBus Master to BACnet IP Support 250 slaves ]
Order Code:
- U2403 –S125 [ Mbus to Modbus RTU /TCP – Support 125 MBus slaves ]
- U2403 –S250 [ Mbus to Modbus RTU /TCP – Support 250 MBus slaves ]
Serial to TCP Convertors
U2301 – Modbus Serial to TCP Gateway
U2301 Modbus Serial to Ethernet Gateway will expand your Data communication over Modbus serial networks to Ethernet / LAN with Secure and two-way communication.
U2301 T - Serial to TCP Gateway (Transparent)
U2301T Serial to Ethernet Gateway will expand your Data communication over wired networks by Ethernet / LAN Gateway with Secure and two-way communication, without in-depth knowledge of Protocol Concepts.
U2301 TM – MBus Serial to TCP Gateway
U2301TM MBus Serial to Ethernet Gateway will expand your Data communication over MBus master serial networks to Ethernet / LAN with Secure and two-way communication.
4G Cloud Gateways
Our smart UC420M Modbus RTU to 4G PRO Gateway with fall back to (GPRS/2G/3G/4G/LTE) Network will expand your Data communication over wireless networks with Secure and two-way communication. The device can collect data from a variety of Modbus Slaves, Sensors, industrial machines, IO data are sent to the centralized server or cloud server. The gateway supports multiple protocols like TCP / Http / MQTT with SSL mode. We can do the configuration by PC Utility or SMS or Server IP Commands and all parameters are remotely configurable. Plug and Play help greatly reduce the prototype development life cycle and provide developers and solution integrators. The easy transition of Wired Network to Wireless Communication using Modbus RTU to 4G Gateway with a simple and cost-effective solution.
Easy to connect single or multiple any standard Modbus slaves and configure selected Modbus registers. Assure no data loss at any condition because of Our Connect Me Proprietary RTOS and inbuilt Intelligent Logger system will take priority tasks.
USB MBUS Master - U2601U-S20
This USB to M-Bus master consists of serial communication module, power module, modem module, indication module and protection module. The power supply module takes power directly from the USB port without additional power input. Indication module indicates the power status of the master and the data sending and receiving status, as well as the short-circuit and overload of the bus. Protection module protects the USB port of the computer from damage in the event of accidental over-voltage, over-current, and back-up of the M-Bus current, etc
Power Supply - U2701P
A Switched-Mode Power Supply (SMPS) is a type of power supply that converts electrical power effciently from one voltage level to another, usually from a higher voltage (85~264VAC ) to a lower DC voltage 24V DC